# Progress Check Unsatisfactory - [ ] recheck Required: Holding Procedures - when loading an airway, you want to consider the starting point - for example V159 crosses through the orlando VORTAC (ORL) instead of the airport (KORL) -> this is the reason when you were trying to load an airway from KORL it doesn't show any airways available from KORL - was able to load airway from separate fix when not working from KORL (good thinking) - intercepted V159 (good job) # Hold @ SHIMM (NW on V159, right turns, 1 minute legs) ## Entry - good job suspending sequencing - selected parallel entry (acceptable, but teardrop would _technically_ be preferred as per the AIM) - for parallel entry, best practice is to track outbound so that you do not drift with the wind (this is not something that you have to do) - used intercept heading of 089 initially instead of 084, but realized that it was causing a shallow intercept and getting close to fix and increased angle to ensure intercepting before crossing holding fix - required reports (satisfactory) ![[Pasted image 20260102132517.png]] ## Holding Pattern - started timer before crossing abeam fix outbound - used 1:00 for all time outbound (not accounting for tailwind on inbound leg) (unsat) - did not change wind correction angle from first lap which was not enough (unsat) ![[Pasted image 20260102133447.jpg]]